Three-tab shingles
Flat, uniform and the thinner of the two common types. They suit simple roofs and tight plans. Their thinner profile generally ages faster than a thicker shingle, so ask what the roofer expects of them in snow and wind country.
Asphalt shingles are the usual roof on Sherman's lake neighbourhoods and subdivisions; here is how they are laid and what moves the quote.
Fastest: call (833) 751-2102. Or send this and we call you back.
Asphalt shingles are the most common roof covering on the lake homes and subdivisions around Sherman. An independent local roofer installs them over decking, an ice barrier and underlayment, with flashing at every joint. The price depends on the roof's size, pitch, layers and decking, and is confirmed in writing after inspection.
Walk the roads on either side of Candlewood Lake and most of the roofs you see are asphalt shingle. The material suits the housing: lake homes from the mid-century onward, newer subdivisions on the hills, and additions to older farmhouses were all built for it. It is light, it comes in a wide range of colours, and almost every roofer in the area can lay it. That familiarity is part of why it is quoted first.
A shingle roof is a layered system, not just the shingles you see. Under them sit underlayment, a self-adhering ice barrier along the eaves and valleys, metal drip edge, and flashing at every wall, chimney and penetration. The shingles shed the water, but those hidden layers decide whether a Connecticut winter gets under them.
Sherman Roofing is a call line, not a roofing crew. You describe the house and the age of the roof, and the call is put through to an independent local roofer who serves your town. That roofer inspects, writes a scope and does the work. If you are comparing materials, the page on roof replacement shows how the whole job runs. Call (833) 751-2102 to start.
Three-tab shingles are a single flat layer cut into three tabs; architectural shingles are laminated in layers, so they are thicker and have a dimensional look. The thicker kind is usually more resistant to wind and weather, and it is the common quote on homes with multiple gables or dormers.
Both are asphalt-saturated mats surfaced with mineral granules. The difference is mass and shape. A laminated shingle has more material at each point, which helps it hold flat in wind and shed water over irregular surfaces.
Wind ratings and product details are printed on the packaging, and your roofer can show you the numbers for the product being installed. Do not rely on a nickname for a product line; ask for the rating.
An ice barrier is a self-adhering membrane laid along the eaves, valleys and other low points under the shingles. When snow melts and refreezes at the edge, water can back up under shingles. The membrane seals around nails and gives that backed-up water nowhere to go.
This is the layer that makes a Connecticut shingle roof different from one in a warmer state. It does not stop ice dams from forming, which is an attic heat issue, but it limits the leak when they do.
Ask the roofer how far up the slope the barrier will run and whether it goes in valleys and around skylights. See ice dam removal and prevention for why the attic matters as much.
Sometimes, but it is usually better to strip the old roof. Laying over hides the decking, adds weight and can trap problems. Whether a second layer is allowed on your house is a local rule, so confirm it with the town building office and make sure the quote shows what the roofer proposes.
A tear-off lets the roofer see the boards, replace rotted ones and put the ice barrier on bare wood. Over an existing roof, none of that can be checked.
If a roofer proposes a layover, ask for the reasons in writing and check the local rule. The guide on when to replace the roof on a lake or country home explains how layers affect the decision.
Shade keeps shingles damp, which encourages moss and algae, and falling leaves pack into valleys and gutters and hold moisture on the surface. Limbs rubbing the roof scrape off granules. Roofs under heavy canopy need cleaner gutters and valleys, and sometimes a trim, to wear evenly.
Dark streaks are mostly cosmetic algae, but moss lifts shingle edges and holds water. Do not scrub or pressure-wash a roof from a ladder; a roofer has safer methods.
The guide on roofing under trees looks at moss, debris and gutters together.
Do not walk on an asphalt shingle roof to check it. Granules make wet shingles slick and cold shingles crack under weight, and a fall from the eave is dangerous. Inspect from the ground with binoculars and let the roofer climb.
The roofer looks at the shingle condition, counts the layers, checks the eaves, valleys and flashing, and looks at the attic side of the decking. That tells you whether the job is a repair or a new roof.
Three-tab shingles are flat and thin, and architectural shingles are thicker and layered. The roofer shows samples, explains the difference in feel and the wind and weather ratings printed on the packaging, and puts your choice in the scope.
Old shingles, underlayment and flashing are removed. Damaged boards are replaced, and the deck is swept clean so nothing is nailed over debris.
Drip edge, a self-adhering ice barrier at the eaves and in valleys, and underlayment across the rest go down before any shingle. Around Candlewood Lake, where winters bring ice at the edge, this step carries real weight.
A starter strip is laid first, then courses of shingles nailed to the manufacturer's pattern, with step flashing at walls, new collars at vents and metal in the valleys. Ridge caps finish the peak.
A magnet sweep catches nails on the lawn and driveway. The roofer explains how the roof was built and what your paperwork says about the shingles you chose.
Flat, uniform and the thinner of the two common types. They suit simple roofs and tight plans. Their thinner profile generally ages faster than a thicker shingle, so ask what the roofer expects of them in snow and wind country.
Thicker, with layered tabs that give the roof depth. They are the usual quote on lake houses with dormers and gables. Weight, wind rating and appearance differ among products, so look at a physical sample, not only a brochure.
Some roofers offer thicker or sculpted shingles that imitate slate or cedar. They suit period houses where the look matters, though the install detail is more demanding and the cost higher.
Published Connecticut cost guides for asphalt roofs disagree widely, and none describes a Sherman house. So this page prints no figure, and here is what actually moves a quote.
| Job | Typical range | What it includes |
|---|---|---|
| Roof area and pitch | Quoted per roof | Roofers price by the square, 100 square feet of surface, and steeper slopes cost more to work |
| Number of layers | Counted at inspection | A second layer must come off with the first, adding labor and disposal |
| Shingle type | Set by product | Three-tab, architectural and heavier profiles differ in material and install time |
| Ice barrier and underlayment | Part of the scope | The width of ice barrier along the eaves and in valleys changes the material list |
| Valleys, dormers and chimneys | Per detail | Cut-up roofs need more flashing, cutting and hand work than a plain gable |
Your exact price is set by the roofer after inspection and confirmed in writing before any work starts.
Most asphalt shingle roofing calls are scheduled the same day when a technician is free, and you approve the price before any work starts.
Lake neighbourhoods such as Candlewood Lake Estates and Deer Run Shores, and the subdivisions that run toward Danbury, make asphalt shingle the everyday roof. The housing is a mix of older farmhouses and lake homes from the mid-century onward, so asphalt is often both the original covering and the replacement.
Many lake cottages were built for summer and converted for year-round use. Their attics were not designed for winter heat loss, so a new shingle roof on one of them should be paired with a look at insulation and ventilation. Otherwise the same ice dams will return to the new shingles.
Hills and long driveways raise practical questions: where the dumpster sits, how materials are lifted and whether the crew can reach all sides. Wooded lots also mean shade, so ask about moss resistance and how the roofer will handle valleys that collect leaves.
Full tear-offs and re-roofs for Sherman farmhouses and lake homes, with the permit, the decking and the ice barrier written into the scope.
Leaks, loose shingles, worn flashing and limb damage on wooded Sherman-area roofs, looked at and quoted by an independent local roofer.
Air sealing, insulation and a clear airflow path so a converted lake cottage or old farmhouse stops melting its own snow load.
Not sure if you're covered? Check your ZIP code.
A replacement quote in Sherman depends on roof area, pitch and storeys, access for crews and a dumpster, how many layers come off, what the decking turns out to need, the material you choose, and how many valleys, chimneys and skylights need flashing.
It varies with the product, ventilation, shade and how the roof is built. No honest number fits every house. A roofer who inspects your roof can say how much life remains, and what is likely to fail first.
Many homeowners choose them for thickness, wind resistance and appearance, and they are common on cut-up roofs. Ask the roofer to show both samples and explain the rating on each package.
Mostly for looks. Darker shingles absorb more heat and can age faster on a south slope, and shade affects algae. Check any association or town rules on colour before you order.
A re-roof normally needs a permit from the town building office. Confirm it with the roofer, and see the guide on permits to re-roof in Sherman.
It depends on the weather and the roofer. Cold shingles are brittle and sealing strips may not bond until warmer days. The roofer decides whether a job can be done safely and well, and may recommend a temporary fix until conditions improve.
It depends on the house, budget and snow handling. Metal sheds snow readily and costs more to install. See metal roofing for the trade-offs.